ARC brake hose avail for OEM & Aftermarket，it is widely used in hydraulic system of all kinds of automobile and motorcycles to transfer the hydraulic power.

Standard: SAE J1401

Brake fluid: DOT3, DOT4, DOT4+

Material:

Tube: EPDM, perfectly resist oil, heat and permeation of water.

Reinforcement: Made of high strength polyester fiber treated by special resin.

Cover: EPDM, perfectly resist heat and ozone.

Middle Layer: By using viscosity-strengthen middle rubber between reinforcements to provide high dynamic capability.

Feature: Low inner cubage expansion;

Resistance of heat and ozone;

Low moisture permeation, whip and impulse;

Working temperature: -55℃ to +125℃;

Burst pressure: ＞60Mpa.

HYDRAULIC BRAKE HOSE TEST REPORT
Product Name			ARC Brand Hydraulic Brake Hose 3.2mm X 10.5mm - SAE J1401
No	Test Item	QTY	SAE J1401 Standard specification			Test Result
1	Visual inspection	100%	Nothing Abnormal			OK
2	100%Pressure Test	100%	20.7Mpa-24.8Mpa Hold 10-25Seconds.			OK
3	Constriction Test	100%	Insert the "A" diameter portion of constriction gage into the end of fitting. Allow gage to drop of its own weight for the full length of probe, within 5s.			OK
4	Volumetric Expansion	4	6.9Mpa	HR	HL	0.49	0.48	0.48	0.47
				2.17	1.08
			20Mpa	2.59	1.38	0.68	0.67	0.69	0.67
5	Burst Test	4	≥49.03Mpa			83	82	81	83
			No Leakage No Blowing Off
6	Brake Fluid	4	27.6Mpa Hold 2M		≥φ2.03mm	OK	OK	OK	OK
	Compatibility				Burst≥34.5Mpa	80up	80up	80up	80up
7	Whip Test	4	≥35H, 1.55-1.72 Mpa, 800rpm±10rpm. No pressure reduction			52	51	52	50
			No water leakage			ND	ND	ND	ND
8	Tensile Test	4	≥1446N			2300	2300	2300	2300
						DN	DN	DN	DN
9	Cold Bend Test	1	-45- -48°C 70-72H, bend to 180°around mandrel for 3-5s			OK
			No cracks or breaks (Visible without magnification)
10	Ozone Test	1	100mpa±5mpa, 40+3°C for 70-72H			OK
			No cracking under 7X Magnification.
11	Salt Spray Test	1	5 parts±1 part by weight of sodium chloride to 95 parts of distilled water. Ato Mization at 35°C,subject the ass'y to the salt spray for 24H,No Base Metal Corrosion.			OK
12	Water Aborsorption    Test	4		Tensile≥1446N		2300	2300	2300	2300
						ND	ND	ND	ND
			70-72 H	Burst≥35.5Mpa		80	80	80	80
						ND	ND	ND	ND
			Suction	Whip≥35H		50	50	50	50
						ND	ND	ND	ND
13	Hot Impulse Test	1	Cycling Internal Pressure 11 Mpa+0.5, -0 Mpa for 1min±0.1min, within 2S, 150 cycles minimum.			OK
			150 cycles without leakage, 27.6 Mpa for 2 min, no leakage Burst≥34.5Mpa.
14	Dynamic Ozone Test	1	27°C±6°C, at least 24H, 100Mpa±10Mpa, air temperrature 40°C±3°C			OK
			No crack after testing a minimum of 48H.